Print Quote Shop

How to Price 3D Prints

A worked 10-piece order, from slicer inputs to the subtotal a customer sees.

Price a 3D print order from the planned cost of the whole order plus your selling fees and target margin. The number most customers should see is the resulting order subtotal. A shop should also know its break-even price before it offers a discount, especially if some batches need a complete rerun.

Work a cable-clip batch from the slicer

This is the example built into the price calculator. The costs are illustrative. Enter local rates and your own slicer estimates when preparing a real quote.

Input Example
Shop order 10 sellable clips
Pieces per successful run 4
Slicer output per run 120 g and 2 hours 30 minutes
Filament and power USD 25/kg, 120 W average draw and USD 0.25/kWh
Machine rate USD 1 per printing hour
Labor USD 24/hour and 10 hands-on minutes per run, plus 15 once per order
Supplies USD 0.35 per delivered clip
Failed-run rate 10%
Target margin and fees 25% margin, 6% selling fee, USD 0.30 fixed fee

Three runs cover the order. Each full plate’s 120 g already includes the four parts plus support and purge. At full yield, that is 30 g of loaded material and 0.625 machine hours per piece as a planning average. For the ten-piece quote, use 360 g and 7.5 machine hours because the calculator charges the full third run. The same two-and-a-half hours must not be multiplied by four just because four pieces came off the plate. If your two-piece final plate slices at 70 g and 1.5 hours, the two full plates plus that reduced plate use 310 g and 6.5 machine hours. Calculate that smaller plate separately to compare the difference. Material, energy, machine time and per-run labor add up to USD 28.725 across the three planned runs. Dividing by 0.90 yields USD 31.9167 including expected reruns. One-time labor adds USD 6 and supplies add USD 3.50, for an estimated production cost of about USD 41.42.

Divide the unrounded cost plus USD 0.30 by 0.69, which leaves room for both the 25% target and the 6% fee. Rounding up to the next cent gives a selling price of USD 60.46 before tax and shipping. The break-even subtotal with selling fees is USD 44.38. The displayed line items are rounded for readability.

Build a useful machine rate

Allocate replacement over the print hours you realistically expect to use, instead of total elapsed hours. A USD 600 printer with 3,000 expected billable hours has a base allocation of USD 0.20 per hour before maintenance. Add a repair or consumables allowance if needed. Record electricity separately when you can measure the operating draw. Slicer time estimates account for different assumptions from wall-clock usage, so check them on representative runs if cleaning, heating or tool changes add substantially to the cycle. Prusa’s pricing and cost details

Keep charging for the work beyond the print. Cutting supports, drilling and fitting, sanding or inspection all take time. Bill shared design and order setup once. Charge platform and payment fees in the pricing calculation or in a separate quote system if your fee structure also applies to tax, shipping or order minimums that this calculator does not model.

Use the 3D Print Pricing Calculator to check your numbers and download the customer copy.